Wednesday, February 1, 2012

My Range/Oven doesn't broil:
Broil igniter
When the broil igniter becomes weak or burns out, your oven would not broil. The broil igniter is usually mounted on the oven burner. It's about 1 inch by 4-8 inches (depending on the model), and comes in round or flat styles. If you don't see the igniter glow at all, it's probably burned out. Replace the igniter if found defective. Note: one of the exceptions could be that your oven is set to automatic mode instead of manual. If this is the case, set your oven to manual mode and check again.

If the broil igniter glows red and not bright yellow or white, it is probably because it is too weak. When this happens, the safety valve would not let the gas out into the oven burner. A weak igniter must be replaced.

A faulty igniter is probably the most common cause, however there are others:

-- defective thermostat
-- defective selector switch
-- defective gas safety valve

If you are certain the igniter is ok, it might be a good idea to call a professional appliance technician.

Need a new oven igniter?Click herefor most common oven igniters or enter your oven model number in our PART SEARCH.

www.bestserviceappliancerepair.com
BEST SERVICE APPLIANCE REPAIR
718-259-7716            718-616-1362
CALL US TODAY!

No comments:

Post a Comment